2 x 4oz Automotive Tire Sealant Pouches, CO2 Inflator kit with 2 x CO2 cartridges, Dispensing cap, Premium valve core removal tool, 2 x TireJect Valve Stem Caps, 2 x Valve Cores, Pencil air pressure gauge, Tire Plug Kit
The perfect gift that no car owner should be without, don't risk getting stranded or waiting hours for a tow truck. Get TireJect's Emergency Flat Tire Repair Kit that comes with everything you need to repair a flat tire including a source of air.
TireJect™ Technology for on-road, highway speed vehicles
TireJect's patent pending tire sealant formula contains natural liquid rubber and aramid fibers (see material contents). The active sealing fibers plug punctures and slow bead leaks from the inside while the liquid rubber bonds to the tire to form a permanent seal.
*Must use as directed, follow Automotive dosage guidelines. We do not recommend multiple applications on the same tire for on-road vehicles.
**Disclaimer: For highway speed vehicles TireJect should only be used to seal bead leaks or tread punctures up to 1/4". Do not use TireJect to seal sidewall or shoulder punctures, unknown leak locations, punctures larger than 1/4” or any other type of tire or rim damage - highway speed tires in this state should be inspected for highway safety at a certified tire shop. Do not pre-applicate tires with TireJect to prevent flat tires in highway speed tires, only use to repair after a puncture happens in the tire crown (center tread) or for slow bead leaks.
The TireJect™ Emergency Repair Kit is easy to use to quickly repair most flat tires. Follow directions to install tire sealant through the valve stem. Open CO2 Capsule and thread to the valve stem.Insert CO2 Cartridge into capsuleThread the capsule together and tighen until the CO2 cartridge fully discharges into the tire (only takes 10-15 seconds).Unthread the capsule from the valve stem and install the Red TireJect Valve Cap to easily identify the tires that have TireJect installed.Immediately drive or rotate the tire for 5 minutes at slow speed to allow the tire sealant to cover all areas of the tire.
We have 80 tires on the road and in the woods. We use the TireJect fluid when we don’t have a spare. We have no complaints. We work in adverse environmental conditions and it holds up even on rough and rocky terrain. Have used it in ATV tires and heavy trailer tires. Make sure you put the red cap on valve stem afterwards to remember it was a flat tire at one time! Also make sure you buy the correct fluid for your application and read directions before using.