Off-Road Vehicles
TireJect Automotive Tire Sealant for Cars, Trucks, SUVs, and Trailers

Stop wasting time with old traditional tire repair methods that are ineffective at sealing slow bead leaks and time consuming to install for tread punctures. TireJect Automotive Tire Sealant is specifically designed to solve the problems of old traditional tire repair methods. This means TireJect is easy to install, safe for your wheels, will not cause tire vibration or balance issues, and is water soluble for easy clean up.

Bead sealer and Emergency Tire Repair for Automotive tubeless tires
  • Easily fix stubborn bead leaks
  • Repair tread punctures up to 1/4"
  • Emergency road side tire repair
  • Highest rated tire sealant on the market
    (read our reviews)
  • For use with on-road, highway speed vehicles
  • Compact kit to easily carry in your vehicle when you need it most
  • Low viscosity forumla will not cause tire vibration or balance issues*
  • Designed and tested to work with TPMS sensors
TireJect™ Technology for automotive, highway speed vehicles
TireJect's patent pending tire sealant formula contains natural liquid rubber and aramid fibers (see material contents). The active sealing fibers plug punctures and slow bead leaks from the inside while the liquid rubber bonds to the tire to form a permanent seal.
*Must use as directed, follow Automotive dosage guidelines. We do not recommend multiple applications on the same tire for on-road vehicles.
**Disclaimer: For highway speed vehicles TireJect should only be used to seal bead leaks or tread punctures up to 1/4". Do not use TireJect to seal sidewall or shoulder punctures, unknown leak locations, punctures larger than 1/4” or any other type of tire or rim damage - highway speed tires in this state should be inspected for highway safety at a certified tire shop. Do not pre-applicate tires with TireJect to prevent flat tires in highway speed tires, only use to repair after a puncture happens in the tire crown (center tread) or for slow bead leaks.
Tread Punctures
Bead Leaks
Remove Valve Core
Attach Cap Hose & Open
Squeeze Pouch
Re-install Valve Core
Re-Inflate Tire
Install TireJect Valve Cap
Drive or Rotate Tire
Deflate the tire and remove the valve core with the included valve core removal tool. Push the hose over the valve stem and pull/flip open the cap. Squeeze the pouch to force the tire sealant liquid into the tire through the valve stem. Re-install the valve core with the included tool. Re-inflate the tire and install the Red TireJect Valve Cap to easily identify the tires that have TireJect installed. Drive or rotate the tire for 5 minutes to allow the tire sealant to cover all areas of the tire.

Compact Car, Mid-size Sedan, Motorcycle
For tires up to p215/50/17
4oz per tire

Full-size Sedan, Crossover, Small Pickup Truck/SUV
For tires up to p245/65/18
6oz per tire

Full-size Pickup Truck or SUV
For tires over p245/65/18
8oz per tire

*Must use as directed, follow Automotive dosage guidelines. We do not recommend multiple applications on the same tire for on-road vehicles.
**Disclaimer: For highway speed vehicles TireJect should only be used to seal bead leaks or tread punctures up to 1/4". Do not use TireJect to seal sidewall or shoulder punctures, unknown leak locations, punctures larger than 1/4” or any other type of tire or rim damage - highway speed tires in this state should be inspected for highway safety at a certified tire shop. Do not pre-applicate tires with TireJect to prevent flat tires in highway speed tires, only use to repair after a puncture happens in the tire crown (center tread) or for slow bead leaks.
What is TireJect Tire Sealant made with?
What is TireJect Tire Sealant made with?
  • Natural liquid rubber*
  • High strength Aramid fibers (Dupont™ Kevlar®)
  • TireJect is Made in the USA
TireJect is 100% safe for your tire, rim and valve stem
  • No harsh chemicals
  • Non-hazardous, Non-corrosive, Non-toxic
  • Will not clog the valve stem
  • Compatible with TPMS sensors
On-Road Automotive Tire Sealant
  • TPMS Safe - The TireJect Automotive formula has been designed and tested to work with TPMS sensors.
  • Will not clog the valve stem and will not damage the electronics.
  • More information about our TPMS safe formula and testing is available in our FAQ
What are Aramid fibers?
Aramid fiber is a high strength synthetic fiber most commonly known as Dupont™ Kevlar®
Download the TireJect MSDS (Materials Safety Data Sheet).
*Product contains natural latex which may cause allergic reaction in some people.
DuPont™ and Kevlar® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company